how to wood floor directly on ground

raised floor home a raised wood floor system is an assembly of beams and girders, floor joists, and plywood or oriented strand board (osb) floor sheathing, all properly sized, connected together and placed on a foundation. a raised wood floor system is designed to elevate the living space off the ground, isolating it from, Free Sample

if you do not want to glue it, then take 3/4 inch thick plywood (thicker to allow nail with tongue and groove) and nail your wood floor to it. fyi: across the panels rather than parrallell... my recommendation would be to glue your floor down directly to concrete following these steps;. measure moisture content of the subfloor;, Free Sample

3/4" thick solid wood flooring and most all other hardwood flooring including engineered or floating engineered wood flooring and laminate floors can be installed directly over 5/8" or 3/4" thick cdx plywood sub floors. although it is standard practice to install all hardwood flooring no matter the thickness, across the floor, Free Sample

while it is possible to install hardwood flooring directly onto a concrete basement floor by gluing it down, it is recommended that a more durable option, such installing subfloor first, or using engineered wood flooring, is considered. because a basement is a below-ground-level space, it is susceptible to moisture and leaks, Free Sample

for this reason, every installation should include underlayment between the subfloor and the flooring. even when this is present, however, you may still have moisture problems over a cseven trustlspace unless you take precautions. they include covering the ground with a vapor barrier and providing adequate ventilation in the, Free Sample

two of these reasons are: 1) oftentimes the concrete is moisture permeable, which means that any solid wood floor installed directly to the floor will buckle irreversibly; 2) typically solid wood floors are nailed to the substrate, which , above grade means not below the ground level such as a basement floor. Free Sample

with dry concrete and the right subfloors and vapor retarders, solid hardwood floors can be installed on slabs that are either on-grade (at ground level) or ,. solid parquet hardwood flooring can be glued directly to a concrete slab on grade or above grade with the use of a manufacturer recommended vapor retarder. Free Sample

putting in your own pre-finished hardwood flooring costs less than having a professional install it. see step 1 for how to , before you go about laying down your floating floor, you need to know how much ground you need to cover. although it's , laying down your floating flooring directly onto concrete is a no-no. for one, Free Sample

i don't think the pressure treated lumber, under the plywood or other floor is a problem, unless tests have shown chemicals are emitted through the air. pressure treated is quite expensive, and i wonder if you actually need it. i don't think you are planning for the wood to be in actual ground contact, just near, Free Sample

because you are likely to be fixing your solid wood boards to the subfloor, underlay is not usually used, but there are slatted underlays you can buy for the purpose, with pre-cut slots that allow the floor to be glued directly to the subfloor (try acoustalay slatted glue through underlay, available from screwfix), Free Sample